Sak’s Music carries both Hamer and its lower priced beginner line Slammer!

 

Features:

· Hamer necks are constructed using a "stressed neck" system, by matching a straight grain with 2 opposing grains .

· Hamer necks are joined using an oversized dovetail joint.

· Hamer uses a low mass, 3/16" in diameter truss rod, requiring less wood to be removed from the neck.

· Hamer installs each steel truss rod pre-tensioned, which allows the truss rod to be adjusted both forward and backward.

· All Hamer frets are hand seated one at a time using a hand press.

· All fingerboards are attached to the necks and allowed to settle before being radiused and fretted.

· Hamer uses a patented "lubritrak nut" which is a material impregnated with lubricating molecules.

· All rosewood fingerboards are "Quarter Sawn".